Finally, after some issues with the xbmc remote app for android and the Youtube add-on everything is working well. The problem was that if I had made a static IP adress, the youtube addon couldn't find results. After I used a dynamic IP adress, it worked all well.
All the materials and tools I've used for this project:
materials:
Raspberry Pi B (512)
SD card (+2gb)
crt TV
2 usb male-female cables (I've used 5 meter, but 1-1,5 should also be enough). For connecting devices on the outside of the tv.
male-male RCA yellow plug cable (you only need one side). For connecting the RPi to the tv.
male-male 3,5 stereo plug (you only need one side). For connecting the RPi to the tv.
unpowered usb hub. You still have to connect an external power to the hub by splitting the cable.
male connector usb. For connecting the power to the usb hub.
usb-microusb cable. For powering the RPi.
ethernet cable, long and short. For connecting the RPi to the female-female block inside the tv, and connecting to the router.
Ethernet female-female block. For having a connector on the outside of the tv.
some tiewrap. To organize the cables.
Powersupply. I've used 5 volt, 2.1 Amp.
on/off switch
terminal block
tools
solderiron, with solder
scissors
multimeter
smartphone or mouse (for using as remote)
usb keyboard. For installing the xbmc, when it is ready, you can use a usb mouse or your smartphone
screwdrivers
pliers and drill. To make holes for fitting the RPi
I hope I will make a scematic how I've connected everything up.
No comments:
Post a Comment